GAF President's Club · GAF's Highest HonorCoastal-Tough Metal Roofing Built to Last
A metal roof can shrug off salt air, wind-driven rain, and decades of coastal weather long after asphalt would have failed. We design and install standing seam and metal panel systems for homes across Eastern North Carolina, the Outer Banks, Louisiana, and West Texas.
Licensed & InsuredNC #85568
Metal roofing is one of the toughest, longest-lasting systems you can put on a coastal home. A properly installed standing seam or metal panel roof resists high wind, salt air, wind-driven rain, and hail, reflects summer heat, and can last for decades, far longer than asphalt. Patriots’ Roofing engineers and installs metal roofs across the NC coast, Louisiana, and West Texas.
Should I choose standing seam or exposed-fastener panels?
Both are excellent metal systems, and the right one depends on your roof, your budget, and the look you want. Standing seam hides every fastener under raised, interlocking seams, which is why it is our first recommendation for coastal homes that take a beating from wind and salt. Exposed-fastener panels are a budget-friendlier option that performs beautifully on porches, outbuildings, barns, and many agricultural or rural homes in West Texas.
- Standing seam: concealed fasteners, clean architectural lines, top-tier wind and water resistance, the premium choice for primary coastal residences.
- Exposed-fastener panels: lower cost, fast installation, a proven fit for shops, barns, and accessory structures.
- Not sure which fits? Our free estimate walks you through the trade-offs on your actual roof, with no pressure.
Why does metal hold up so well on the coast?
Coastal roofs face a brutal combination: sustained wind, salt-laden air, sideways rain, and the occasional hailstorm. Metal answers all of it. Interlocking standing seam panels lock out wind-driven rain that lifts under shingle tabs, factory finishes resist salt corrosion, and metal does not crack, curl, or grow algae the way asphalt can in humid air. For the highest level of storm resilience, we build to FORTIFIED standards, the same construction approach that can help qualify NC coastal homeowners for grant money and insurance benefits.
How long does a metal roof last, and is it worth it?
A quality metal roof is measured in decades, not years. That longevity is the heart of the value: you may never re-roof again. Add in reflective, energy-saving finishes that can lower attic heat in the Texas and Louisiana sun, plus the durability and wind ratings that some insurers reward, and metal becomes a smart long-term investment, not just a roof. When metal is not the right fit, our team will tell you straight and walk you through a premium roof replacement in shingle instead.
Built for Decades, Designed for Your Home
Storm & Wind Resistance
Standing seam locks out wind-driven rain and stands up to coastal gusts and hail. We can build to FORTIFIED standards for the highest resilience available.
A Lifespan in Decades
Metal far outlasts asphalt. Salt air, humidity, and UV that age shingles quickly have little effect on a properly finished metal system.
Energy & Curb Appeal
Reflective finishes shed summer heat to help with cooling costs, and a wide range of colors and profiles lets your roof match the home you love.
How Metal Compares to Asphalt
Both are great roofs. Here is how a standing-seam metal system stacks up against a quality architectural shingle roof.
| What matters | Asphalt Shingle | Metal |
|---|---|---|
| Typical lifespan | 20 to 30 years | 40 to 70 years |
| High-wind resistance | Very good | Excellent |
| Coastal salt-air durability | Good | Excellent |
| Ongoing maintenance | Periodic | Very low |
| Energy reflectivity | Standard | High |
| Upfront cost | Lower | Higher |
Metal Roofs We Have Installed
GAF Master EliteCertified Crews
A Metal Roof Is Only as Good as Its Installer
Metal panels are unforgiving of shortcuts. Seams, flashings, fastener spacing, and panel expansion all have to be right, or even premium materials can leak and loosen over time. As a fifth-generation, family-owned company founded in 1836, we install metal the way it is meant to be done, with crews that have done it for years on real coastal and West Texas homes.
- GAF Master Elite, in the top 2% of contractors nationwide.
- Detailed flashing and seam work where coastal roofs usually fail.
- Clear written scope so you know exactly what you are getting.
- Backed by the GAF Golden Pledge warranty with an unlimited wind rating on qualifying systems.
How Your Metal Roof Comes Together
- Free inspection. We measure your roof, check the deck and ventilation, and listen to what you want from your new roof.
- System & color selection. We help you choose standing seam or panels, the right gauge and finish, and a color and profile you love.
- Clear written estimate. You get a transparent quote with the full scope spelled out, no surprises and no pressure.
- Schedule & prep. We set a start date, protect your landscaping, and stage materials for a clean, efficient job.
- Expert installation. Our certified crew installs the underlayment, flashings, and metal panels with coastal-grade detailing.
- Final walkthrough & warranty. We clean up completely, walk the finished roof with you, and register your warranty coverage.
Metal Roofing FAQs
How long does a metal roof actually last?
A quality metal roof is measured in decades and routinely outlasts asphalt shingle by a wide margin. Coastal salt air, humidity, and intense UV that age shingles quickly have far less effect on a properly finished metal system, which is a big part of why so many coastal and West Texas homeowners choose it.
Standing seam or exposed-fastener panels, which should I get?
Standing seam hides its fasteners under interlocking seams and is our top pick for primary coastal homes that face heavy wind and rain. Exposed-fastener panels cost less and are a great fit for shops, barns, porches, and many rural West Texas structures. We will recommend the right system for your specific roof during your free estimate.
Is metal roofing a good choice for coastal North Carolina and the Outer Banks?
Yes. Metal is one of the strongest options for the coast because standing seam locks out wind-driven rain, factory finishes resist salt corrosion, and the system handles hail and high wind well. We can also build to FORTIFIED standards, which may help qualify NC coastal homeowners for grant money and insurance benefits.
Can a metal roof lower my energy bills?
It can help. Reflective metal finishes bounce away a portion of the summer heat that a dark asphalt roof absorbs, which can ease the load on your cooling system in the Texas and Louisiana sun. Pair that with decades of lifespan and the energy story becomes part of metal’s long-term value.
Does a metal roof qualify for any insurance or durability benefits?
Many insurers recognize the durability and wind resistance of a properly installed metal roof, and some offer benefits for impact-resistant or FORTIFIED-level construction. Benefits vary by carrier and policy, so we encourage you to confirm specifics with your insurer. We are glad to document your system to support that conversation.
Do you offer free estimates for metal roofing?
Yes. Every metal roof starts with a free, no-pressure inspection and a clear written estimate. We will walk you through metal versus shingle honestly so you can make the right call for your home and budget.
Roofing Resources
Metal Roof vs Shingles · Standing Seam vs Exposed-Fastener Metal · Does a Metal Roof Lower Insurance?
Ready for a Roof That Lasts Decades?
Get a free inspection and a straight answer on whether metal is right for your home. We also handle full roof replacement and commercial roofing across every region we serve.